Skip to content
PromashCall
1 / 2
All Optimum products

Brand: Optimum · Stürmer Maschinen, Germany

Center lathe Optimum OPTIturn TU 2506 (400 V)

Article no. 3425003Universal lathes

Turning diameter
250 mm
Distance between centres
550 mm
Spindle speed
125 – 2000 rpm
Spindle bore
26 mm
Spindle power
0.75 kW
Power supply
400V/3Ph ~50 Hz

€2,386.80incl. VAT

BGN 4,668.18

If the machine is not in the showroom, the delivery time is 7 working days. We confirm availability when we accept the order. Delivery times

Call

Advice: +359 882 477 388

Buy in instalments

  • Buy in instalments with tbi bank

    Online application, approval by the bank, contract.

  • UniCredit consumer financing

    A purchase loan through UniCredit Consumer Financing.

  • Official importer of Stürmer Maschinen
  • Warranty and out-of-warranty service
  • Delivery by Pigeon Express to an address or office
  • Technical experts at your disposal

Technical specifications

Basic features
Turning diameter250 mm
Distance between centres550 mm
Spindle speed125 – 2000 rpm
Spindle bore26 mm
Spindle power0.75 kW
Power supply400V/3Ph ~50 Hz
Weight138 kg
TU 2506VBSpeed change easily adjustable via potentiometer
Dimensions and weights
Length (product) approx.1250 mm
Width/depth (product) approx.585 mm
Height (product) approx.475 mm
Net weight approx.138 kg
Work areas
Center height125 mm
Distance between center550 mm
Swing diameter above machine bed246 mm
Swing diameter above planing slide149 mm
Bed width134 mm
Speed range
Number of gears6 Steps
Electrical Data
Drive motor output0.75 kW
Mains frequency50 Hz
Spindle
Spindle chuckshort taper
Tool holder max. chuck height12 mm
Spindle coneMT 4
Tailstock
Tailstock chuckMK 2
Tailstock quill stroke65 mm
Tailstock quill diameter30 mm
Pitches
Metric pitch0.2 – 4 mm/rev
Number of metric pitches21
Imperial pitch56 – 8 TPI/1"
Number of imperial pitches21
Travel
Travel upper slide70 mm
Travel cross slide110 mm
Travel carriage saddle550 mm
Feed
Longitudinal feed range0.07 – 0.4 mm/rev
Number of longitudinal feeds6

Features

  • Precisely manufactured
  • Powerful, maintenance-free engine
  • Hardened and ground Z-axis guideway
  • Guaranteed concentricity of the spindle nose ≤ 0.009 mm
  • Concentricity on the lathe chuck ≤ 0.04 mm
  • Lead screw for thread cutting or automatic longitudinal turning
  • Leadscrew stored in two sintered bearings
  • All guides can be adjusted by wedge strips
  • Right / left rotation in the control panel switchable
  • Rolled trapezoid spindles
  • Thrust bearing
  • Tapered roller bearings in P5 quality
  • Hardened main spindle mounted in adjustable precision tapered roller bearings
  • Hardened spindle nose with Ø 26 mm spindle bore
  • Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
  • Upper slide on cross slide slidable
  • Chip protection on the upper slide
  • Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
  • Tailstock for taper turning ± 5 mm adjustable
  • Tailstock quill and handwheel with adjustable fine scale 0.02 mm
  • Quick, easy and tool-free adjustment of the tailstock by a clamping lever
  • Emergency stop impact switch
  • Quadruple tool holder
  • 3-jaw lathe chuck in the standard scope of delivery
  • Change gear set in the standard scope of delivery for thread cutting
  • Fully equipped, allowing the user to be productive immediately after commissioning
  • Center lathe with feed gear for the demanding user

Scope of delivery

  • Three-jaw lathe chuck Ø 125 mm, centrically exciting
  • Fixed centering point MK 2 and MK 4
  • Quadruple tool holder 12 mm
  • HSS lathe tool
  • Bulkhead
  • Chip pan
  • Change gear set
  • Operating tool

The data comes from the product description. To clarify a parameter, call +359 882 477 388.

Delivery, warranty and service

Delivery by Pigeon Express

  • Products in stock: delivered on the same day or on the next working day after the order is confirmed.
  • Products not in stock: the delivery time is 7 working days, unless one of our staff specifies otherwise.
  • By Pigeon Express to an address or an office. The delivery price is shown in the order, according to weight and destination, and is paid to the courier on receipt.
Shipping weight
138 kg
Dimensions
125 × 58.5 × 47.5 cm
Delivery terms

Warranty

“The warranty period is 24 months for all private individuals and 12 months for all legal entities, unless stated otherwise in the product description.”

Promash provides a warranty in accordance with the manufacturer's terms.

Frequently asked questions

Service and advice

Warranty and out-of-warranty service. Technical experts at your disposal for choosing a machine, commissioning and training.

Call: +359 882 477 388

Accessories for this machine

The original Stürmer accessories and options for Center lathe Optimum OPTIturn TU 2506 (400 V) — add them to the order together with the machine.

Show 28 more accessories