Membrane dryer DRYPOINT M PLUS 40-61A

Article no. 2048305Compressed air dryers

Purge air at 7 bar: 180 l/min
Maximum pressure: 12.5 bar
Air connection: G 3/4 "
Width/Depth (B): 146 mm
Diameter (D): 125 mm
Height (A): 795 mm

€4,677.60incl. VAT

BGN 9,148.59

If the machine is not in the showroom, the delivery time is 7 working days. We confirm availability when we accept the order. Delivery times

Advice: +359 882 477 388

Buy in instalments

Buy in instalments with tbi bank
Online application, approval by the bank, contract.
UniCredit consumer financing
A purchase loan through UniCredit Consumer Financing.

Official importer of Stürmer Maschinen
Warranty and out-of-warranty service
Delivery by Pigeon Express to an address or office
Technical experts at your disposal

Technical specifications

Basic features
Purge air at 7 bar	180 l/min
Maximum pressure	12.5 bar
Air connection	G 3/4 "

Dimensions and weights
Width/Depth (B)	146 mm
Diameter (D)	125 mm
Height (A)	795 mm
Net weight approx.	9.1 kg

Volume flow input
Volume flow input (PDP reduction from +35°C to +15°C)	1650 l/min
Volume flow input (PDP reduction from +5°C to -7°C)	1650 l/min
Volume flow input (PDP reduction from +35°C to +3°C)	1125 l/min
Volume flow input (PDP reduction from +5°C to -17°C)	1125 l/min
Volume flow input (PDP reduction from +35°C to -10°C)	860 l/min
Volume flow input (PDP reduction from +5°C to -26°C)	860 l/min
Volume flow input (PDP reduction from +35°C to -20°C)	740 l/min
Volume flow input (PDP reduction from +5°C to -33°C)	740 l/min
Explanation Volume flow input	Specifications refer to a pressure of 7 bar. When changing the pressure, the correction factors must be taken into account.

Advantages DRYPOINT M PLUS
Complete solution	filtration and dryer in a compact form, integration of drain pipe

Features

The ultimate membrane dryer technology with integrated nanofilter
Filtration and drying in one housing (simple filter element change)
Low purge air requirement (Twist 60 technology)
Availability of dried compressed air immediately without running-in phase
Safe drying due to the high partial vapor pressure gradient
No change in the compressed air temperature and composition
Proven 100,000 times
Maintenance-free (except filter element change)
For diverse applications, including for breathing air treatment
Also ideal for use directly behind the compressor / aftercooler
Optionally also for higher loads (assembly potting, 16 bar, 70°C)
For a reliable function of the DRYPOINT M membrane dryer must meet the following requirements:
The incoming compressed air must not contain any liquid condensate
Particles larger than 1 μm must be separated before the membrane dryer
The oil content of the compressed air must not exceed 0.01 mg/m³
with integrated filter

DRYPOINT M membrane dryers have been an alternative to existing ones for years Compressed air drying process proven

Advantages DRYPOINT M PLUS

Proven process of highest reliability and functional safety
Immediate availability of dry compressed air, even when working discontinuously
Low purge air requirement, compressed air drying can be adjusted to the application
Compact and robust, small space requirement due to low overall height
Compressed air inlet and outlet on one level (filter version), easy to combine with CLEARPOINT filters
Maintenance and wear-free as there are no moving parts
No reduction in the oxygen content, therefore also suitable for breathing air treatment
No electrical connection, also suitable for Ex areas
Long service life in case of use of CLEARPOINT filters
Environmentally friendly, does not require CFCs / CFC-containing refrigerants or adsorbents
Filtration at the point in the treatment chain where the highest efficiency is achieved
Easy maintenance / replacement of filter element as with a regular filter

Trap: Float trap

The basic version includes a float drain

Scope of delivery

2 wall brackets
Connection fitting for filter (1" | 1")

The CLEARPOINT filter element type N is used to separate solid particles down to 0.01 micron, water and oil aerosols . The element has a multi-stage structure for efficient and long-lasting filtering. In the first stage, coarse particles are retained by a pre-filter layer. In the second stage, finer particles are absorbed by a depth filter bed made of high-performance borosilicate fiber fabric. Due to the very large cavity volume of the filter medium (96%), a very high dirt holding capacity is achieved. The filter medium is specially impregnated in order to avoid cross-sectional swelling of the individual fibers.

This size is for the demand-oriented compressed air drying of medium volume flows configured. Different levels of drying of the compressed air are achieved through different purge air settings.

The data comes from the product description. To clarify a parameter, call +359 882 477 388.

Delivery, warranty and service

Delivery by Pigeon Express

Products in stock: delivered on the same day or on the next working day after the order is confirmed.
Products not in stock: the delivery time is 7 working days, unless one of our staff specifies otherwise.
By Pigeon Express to an address or an office. The delivery price is shown in the order, according to weight and destination, and is paid to the courier on receipt.

Shipping weight: 8.8 kg
Dimensions: 1000 x 150 x 220 mm

Delivery terms

Warranty

“The warranty period is 24 months for all private individuals and 12 months for all legal entities, unless stated otherwise in the product description.”

Promash provides a warranty in accordance with the manufacturer's terms.

Frequently asked questions

Service and advice

Warranty and out-of-warranty service. Technical experts at your disposal for choosing a machine, commissioning and training.

Call: +359 882 477 388