Electrode inverter CRAFT-STICK 253

Article no. 1073253Inverter stick welders

Electrode diameter: 1.6 - 5.0 mm
Welding current range: 20 - 250 A
Supply voltage: 400V/3Ph ~50 Hz
Weight: 11.8 kg
Dimensions: 495 x 190 x 350 mm

€766.80incl. VAT

BGN 1,499.73

If the machine is not in the showroom, the delivery time is 7 working days. We confirm availability when we accept the order. Delivery times

Advice: +359 882 477 388

Buy in instalments

Buy in instalments with tbi bank
Online application, approval by the bank, contract.
UniCredit consumer financing
A purchase loan through UniCredit Consumer Financing.

Official importer of Stürmer Maschinen
Warranty and out-of-warranty service
Delivery by Pigeon Express to an address or office
Technical experts at your disposal

Technical specifications

Basic features
Electrode diameter	1.6 - 5.0 mm
Welding current range	20 - 250 A
Supply voltage	400V/3Ph ~50 Hz
Weight	11.8 kg
Dimensions	495 x 190 x 350 mm
VRD (Volt Reduction Device)	voltage reduction at no load

Dimensions and weights
Length (product) approx.	495 mm
Width/depth (product) approx.	190 mm
Height (product) approx.	350 mm
Net weight approx.	11.8 kg

Setting range
Setting range electrode	20 – 250 A
Setting range TIG	20 – 250 A

Duty cycle
Duty cycle at Imax. 40°C electrode	60 %
Duty cycle at Imax. 40°C TIG DC	60 %
Current at 100% DC 40°C electrode	200 A
Current at 100% DC 40°C TIG DC	200 A

Electrical Data
Mains frequency	50/60 Hz

Standards and certifications
Standard	EN 60974-1:2012, EN 60974-10:2014
EMC class	A
Marking	CE

Input
Power consumption electrode	8.5 kVA
Power consumption TIG DC	6.3 kVA
Efficiency	89 %

Electrical connections
Required generator output	>10 kVA
Positive mains voltage tolerance	10 %
Negative mains voltage tolerance	10 %
Open circuit voltage	MMA 70.1/ TIG 69.4 V
Connection cable length	2.2 m
Power consumption in idle mode	< 50 W
Input current electrode	17.7 A
Input current TIG	13.1 A
Total output electrode	10 kVA
Total output TIG	7.4 kVA

Features

All devices are built in modern inverter technology
Best suited for assembly work (on ladders, scaffolding, ...) and due to protection class IP 21S generally also for outdoor work
Suitable for use on the generator e.g. in operating workshops, ports, chemical plants, schools, metal construction, on construction sites, ships or for farmers
Protection against moisture, salt spray and corrosion due to sealed circuit board. Therefore also suitable offshore
Hot Start: By adjustable short-time increase of the welding current the arc ignites safely and is immediately stable
Anti-stick: If the electrode accidentally sticks, the welding current is automatically reduced, preventing the electrode from annealing
With WG DC LiftArc ignition
400 volt model in standard version with sealed circuit board

Standards and certifications

Explanation EMC class: This Class A welding equipment is not intended for use in residential areas where power is supplied by a public low-voltage power supply system

Scope of delivery

3 m welding cable 25 mm² with electrode holder 300 A
3 m ground cable 25 mm² with ground terminal 300 A

Arc Force control: Internal monitoring of welding current and voltage quickly and safely resolves short circuits. The adjustable increase of the current stabilises the arc and the electrode can be processed without problems.

The data comes from the product description. To clarify a parameter, call +359 882 477 388.

Delivery, warranty and service

Delivery by Pigeon Express

Products in stock: delivered on the same day or on the next working day after the order is confirmed.
Products not in stock: the delivery time is 7 working days, unless one of our staff specifies otherwise.
By Pigeon Express to an address or an office. The delivery price is shown in the order, according to weight and destination, and is paid to the courier on receipt.

Shipping weight: 11.8 kg
Dimensions: 49.5 × 19 × 35 cm

Delivery terms

Warranty

“The warranty period is 24 months for all private individuals and 12 months for all legal entities, unless stated otherwise in the product description.”

Promash provides a warranty in accordance with the manufacturer's terms.

Frequently asked questions

Service and advice

Warranty and out-of-warranty service. Technical experts at your disposal for choosing a machine, commissioning and training.

Call: +359 882 477 388