Skip to content
PromashCall
All Schweisskraft products

Brand: Schweisskraft · Stürmer Maschinen, Germany

Portable TIG AC/DC inverter CRAFT-TIG 201 AC/DC P PULSE

Article no. 1074202TIG welding machines

Electrode diameter
1.6 – 4.0 mm
Range
5 - 200 A
Voltage
1 x 90~275 V, 230V/1Ph ~50 Hz
Weight
15.5 kg

€1,618.80incl. VAT

BGN 3,166.10

If the machine is not in the showroom, the delivery time is 7 working days. We confirm availability when we accept the order. Delivery times

Call

Advice: +359 882 477 388

Buy in instalments

  • Buy in instalments with tbi bank

    Online application, approval by the bank, contract.

  • UniCredit consumer financing

    A purchase loan through UniCredit Consumer Financing.

  • Official importer of Stürmer Maschinen
  • Warranty and out-of-warranty service
  • Delivery by Pigeon Express to an address or office
  • Technical experts at your disposal

Technical specifications

Basic features
Electrode diameter1.6 – 4.0 mm
Range5 - 200 A
Voltage1 x 90~275 V, 230V/1Ph ~50 Hz
Weight15.5 kg
AC triangle wave welding outputreduced heat input for the same current setting, especially useful for welding thin metal
AC Sine Wave Welding OutputTraditional AC TIG welding waveform, quieter, "softer" arc characteristics.
AC square wavefocused arc for maximum penetration, fast travel speed with best directional control
Dimensions and weights
Length (product) approx.580 mm
Width/depth (product) approx.190 mm
Height (product) approx.350 mm
Net weight approx.14.5 kg
Equipment
Power factor correctionYes
Process TIG pulsingYes
Setting range
Setting range TIG3 - 200 A
Setting range electrode10 - 200 A
Duty cycle
Duty cycle at Imax. 40°C TIG DC60 %
Duty cycle at max. current 40°C Electrode35 %
Current at 100% DC 40°C TIG DC155 A
Current at ED 100% 40°C Electrode120 A
Electrical Data
Mains frequency50/60 Hz
Power factor0.99 cos phi
Input current TIG AC19.2 A
Input current TIG DC20.5 A
Input current electrode AC27.5 A
Input current electrode DC30 A
Electrode
Weldable electrodes1.6 - 4.0 mm
Device data
Pulse rate0.5 - 999 Hz
IgnitionHigh frequency
Torch coolingGas / Water
Basic Features
Sheet thicknesses0.5 – 10 mm
Standards and certifications
StandardEN 60974-1:2012/EN 60974-10:2014
EMC classA
Input
Power consumption TIG4.7 kVA
Power consumption electrode6.9 kVA
Efficiency83.37 %
Electrical connections
Required generator output>6.9 kVA
Open circuit voltage10.4 (MMA), 70 (TIG) V
Connection cable length2.2 m
Power consumption in idle mode< 50 W

Features

  • Built with modern inverter technology
  • Ideally suited for assembly work due to protection class IP 21S generally also for outdoor work
  • Universally applicable for welding of all common electrode types
  • TIG pulsing enables welding with reduced heat input
  • HF high frequency ignition ignites during TIG welding without touching the workpiece
  • Quiet running fans dissipate heat well from the equipment for long duty cycles
  • Time controlled fan with stand-by mode
  • Adjustable balance
  • Precise setting of welding parameters via digital display
  • Device equipped with PFC (power factor correction), enables best use even on cable drums
  • Optional with water cooling
  • Multivoltage from 110 to 230 volts
  • Nine programs can be stored
  • MMA mode with hot-start and arc-force control
  • Adjustable weldinge curve
  • For workshop and mobile use

Standards and certifications

  • Explanation EMC class: This Class A welding equipment is not intended for use in residential areas where power is supplied by a public low-voltage power supply system

Scope of delivery

  • Gas hose 4 m incl. quick connector
  • Torch TIG SR26 4 m with Up/Down function (gas-cooled)
  • Pressure reducer
  • 3m ground cable 25 mm² with ground clamp

The data comes from the product description. To clarify a parameter, call +359 882 477 388.

Delivery, warranty and service

Delivery by Pigeon Express

  • Products in stock: delivered on the same day or on the next working day after the order is confirmed.
  • Products not in stock: the delivery time is 7 working days, unless one of our staff specifies otherwise.
  • By Pigeon Express to an address or an office. The delivery price is shown in the order, according to weight and destination, and is paid to the courier on receipt.
Shipping weight
15.5 kg
Dimensions
58 × 19 × 35 cm
Delivery terms

Warranty

“The warranty period is 24 months for all private individuals and 12 months for all legal entities, unless stated otherwise in the product description.”

Promash provides a warranty in accordance with the manufacturer's terms.

Frequently asked questions

Service and advice

Warranty and out-of-warranty service. Technical experts at your disposal for choosing a machine, commissioning and training.

Call: +359 882 477 388

Accessories for this machine

The original Stürmer accessories and options for Portable TIG AC/DC inverter CRAFT-TIG 201 AC/DC P PULSE — add them to the order together with the machine.

Show 17 more accessories