Skip to content
PromashCall
1 / 6
All Optimum products

Brand: Optimum · Stürmer Maschinen, Germany

Precision guide and drawbar turning machine Optimum OPTIturn TX 6222 - DPA 32, 400 V

Article no. 3432462Universal lathes

Length (product) approx.
3550 mm
Width/depth (product) approx.
1200 mm
Height (product) approx.
1830 mm
Net weight approx.
2800 kg
Center height
310 mm
Distance between center
2200 mm

Price on request

If the machine is not in the showroom, the delivery time is 7 working days. We confirm availability when we accept the order. Delivery times

Call
  • Official importer of Stürmer Maschinen
  • Warranty and out-of-warranty service
  • Delivery by arrangement
  • Technical experts at your disposal

Technical specifications

Dimensions and weights
Length (product) approx.3550 mm
Width/depth (product) approx.1200 mm
Height (product) approx.1830 mm
Net weight approx.2800 kg
Work areas
Center height310 mm
Distance between center2200 mm
Swing diameter above machine bed620 mm
Swing diameter above planing slide424 mm
Turning length in bed bridge880 mm
Bed width350 mm
Speed range
Number of gears12
Speed range40 – 1650 min¯¹
Electrical Data
Drive motor output7.5 kW
Supply voltage400 V
Mains frequency50 Hz
Total rated value8.5 kW
Cooling lubricant system
Cooling lubricant system coolant pump output100 W
Spindle
Spindle chuckCamlock DIN ISO 702-2 No. 8
Spindle bore105 mm
Spindle coneØ 113 (cone 1:20) mm
Tailstock
Tailstock chuckMT5
Tailstock quill stroke180 mm
Tailstock quill diameter72 mm
Pitches
Metric pitch0.5 - 15 mm/rev
Number of metric pitches55
Imperial pitch60 – 2 TPI/1"
Number of imperial pitches55
Diametrical pitch120 – 4 TPI/π
Number of diametrical pitches55
Modular thread pitch0.25 – 7.5 mm x π
Number of modular thread pitches55
Travel
Travel upper slide170 mm
Travel cross slide350 mm
Travel carriage saddle2000 mm
Feed
Longitudinal feed range0.05 – 1.5 mm/rev
Number of longitudinal feeds55
Flat feed range0.025 – 0.75 mm/rev
Number of flat feeds55

Features

  • Machine bed made of heavily ribbed cast iron
  • One-piece machine base made of steel
  • High rigidity of the headstock housing thanks to heavily ribbed 25GG casting
  • All gear wheels of the feed gear made of hardened steel
  • Shafts on needle bearings, all components are lubricated in an oil bath
  • Hardened and ground face spindle ensures enormous accuracy and durability
  • High chip removal during roughing is no problem thanks to the high cutting capacity
  • Service-friendly removable rear panel
  • Energy chain for gentle cable and hose guidance
  • Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
  • Decoupled handwheels tested in accordance with EN 23125
  • Two-channel right/left switch tested in accordance with EN 23125
  • No change wheels necessary
  • Switch with life cycle calculation tested in accordance with EN ISO 13849
  • With safety device to prevent simultaneous operation of tapping and feed mechanism
  • Bed guides hardened and precision ground
  • Electronically braked motor
  • Electronic feed cut-off of the Z-axis
  • All electronic controls can be reached centrally
  • Complete illumination of the work area
  • External coolant tank with level indicator and oil separator
  • Complete lead and feed spindle cover
  • Electric position stop with quadruple position stop
  • Three-jaw lathe chuck included as standard
  • Quick-change steel holder SWH 7-C
  • 1 steel holder 32 x 130 type D for square chisel 25 mm
  • Digital position indicator DPA 32-3
  • meets the highest requirements in technical equipment and precision. With digital position indicator DPA 32-3

TX 5216

  • Large spindle bore Ø 80 mm

TX 6222

  • Large spindle bore Ø 105 mm

Scope of delivery

  • Operating tool
  • Initial machine filling with quality oil
  • Three-jaw lathe chuck Ø 315 mm Camlock no. 8
  • Two non-rotating centers MK5 (short/long)
  • Steel holder for square chisel 32 x 130 type D
  • Adapter Ø 113 mm-MK5

The data comes from the product description. To clarify a parameter, call +359 882 477 388.

Delivery, warranty and service

Delivery by arrangement

  • Products in stock: delivered on the same day or on the next working day after the order is confirmed.
  • Products not in stock: the delivery time is 7 working days, unless one of our staff specifies otherwise.
  • Pigeon Express carries shipments of up to 400 kg. For this machine we agree the delivery method and price with you when we confirm the order.
Shipping weight
1400 kg
Dimensions
2124 x 3580 x 1400 mm
Delivery terms

Warranty

“The warranty period is 24 months for all private individuals and 12 months for all legal entities, unless stated otherwise in the product description.”

Promash provides a warranty in accordance with the manufacturer's terms.

Frequently asked questions

Service and advice

Warranty and out-of-warranty service. Technical experts at your disposal for choosing a machine, commissioning and training.

Call: +359 882 477 388

Accessories for this machine

The original Stürmer accessories and options for Precision guide and drawbar turning machine Optimum OPTIturn TX 6222 - DPA 32, 400 V — add them to the order together with the machine.

Show 13 more accessories