Skip to content
PromashCall
1 / 6
All Optimum products

Brand: Optimum · Stürmer Maschinen, Germany

Precision guide and drawbar turning machine Optimum OPTIturn TX 6222V, 400 V

Article no. 3432467Universal lathes

Length (product) approx.
3605 mm
Width/depth (product) approx.
1739 mm
Height (product) approx.
1905 mm
Net weight approx.
2800 kg
Center height
310 mm
Distance between center
2225 mm

Price on request

If the machine is not in the showroom, the delivery time is 7 working days. We confirm availability when we accept the order. Delivery times

Call
  • Official importer of Stürmer Maschinen
  • Warranty and out-of-warranty service
  • Delivery by arrangement
  • Technical experts at your disposal

Technical specifications

Dimensions and weights
Length (product) approx.3605 mm
Width/depth (product) approx.1739 mm
Height (product) approx.1905 mm
Net weight approx.2800 kg
Work areas
Center height310 mm
Distance between center2225 mm
Swing diameter above machine bed620 mm
Swing diameter in bed bridge880 mm
Swing diameter above longitudinal slide580 mm
Swing diameter above planing slide424 mm
Turning length in bed bridge231 mm
Equipment
Digital position indicatorDPA 32
Speed range
Number of gears2 x 3 Steps
Speed range14 – 1800 min¯¹
Electrical Data
Drive motor output11 kW
Supply voltage400 V
Mains frequency50 Hz
Total rated value12 kW
Feed motor drive power0.55 kW
Cooling lubricant system
Cooling lubricant system coolant pump output0.1 kW
Spindle
Spindle chuckCamlock DIN ISO 702-2 No. 8
Tool holderSWH 7-C
Spindle bore105 mm
Spindle coneMT 7
Tailstock
Tailstock chuckMK 5
Tailstock quill stroke180 mm
Tailstock quill diameter72 mm
Pitches
Metric pitch0.5 - 15 mm/rev
Number of metric pitches55
Imperial pitch60 – 2 TPI/1"
Number of imperial pitches55
Diametrical pitch120 – 4 TPI/π
Number of diametrical pitches55
Modular thread pitch0.25 – 7.5 mm x π
Number of modular thread pitches55
Leading spindle pitch6 mm
Travel
Travel upper slide170 mm
Travel cross slide350 mm
Travel carriage saddle2000 mm
Feed
Longitudinal feed range0.05 – 1.5 mm/rev
Number of longitudinal feeds55
Flat feed range0.025 – 0.75 mm/rev
Number of flat feeds55

Features

  • Machine bed made of heavily ribbed cast iron
  • One-piece machine base made of steel
  • High rigidity of the headstock housing due to heavily ribbed 25GG casting
  • Precisely machined slide
  • Shafts on needle bearings, all components are lubricated in an oil bath
  • Bed guides hardened and precision ground
  • All electronic controls can be reached centrally
  • All gear wheels of the feed gear made of hardened steel
  • Handwheels decoupled and tested in accordance with EN 23125
  • Two-channel safety electronics
  • Switch with life cycle calculation, tested in accordance with EN ISO 13849
  • Complete lead and pull spindle cover
  • Complete illumination of the work area
  • Service-friendly removable rear panel
  • Hardened and ground face spindle ensures enormous accuracy and durability
  • High chip removal during roughing is no problem thanks to the high cutting capacity
  • Energy chain for gentle cable and hose guidance
  • Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
  • No change wheels necessary
  • With safety device to prevent simultaneous operation of tapping and feed mechanism
  • Electronic feed switch-off of the Z-axis
  • Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN
  • Electric position switch-off with quadruple position stop
  • Three-jaw lathe chuck included as standard
  • Quick-change steel holder SWH 7-C
  • Steel holder 32 x 130 type D for square chisel 25 mm
  • Large spindle bore
  • With electronically controllable drive and digital position indicator DPA 32

Scope of delivery

  • Three-jaw lathe chuck Ø 315 mm no. 8
  • Non-moving centre point MK 5 long
  • Non-moving centre point MK 5 short
  • Initial machine filling with quality oil
  • Reducing sleeve MK 7 / MK 5
  • Operating tool

The data comes from the product description. To clarify a parameter, call +359 882 477 388.

Delivery, warranty and service

Delivery by arrangement

  • Products in stock: delivered on the same day or on the next working day after the order is confirmed.
  • Products not in stock: the delivery time is 7 working days, unless one of our staff specifies otherwise.
  • Pigeon Express carries shipments of up to 400 kg. For this machine we agree the delivery method and price with you when we confirm the order.
Shipping weight
2800 kg
Dimensions
2124 x 2904 x 2800 mm
Delivery terms

Warranty

“The warranty period is 24 months for all private individuals and 12 months for all legal entities, unless stated otherwise in the product description.”

Promash provides a warranty in accordance with the manufacturer's terms.

Frequently asked questions

Service and advice

Warranty and out-of-warranty service. Technical experts at your disposal for choosing a machine, commissioning and training.

Call: +359 882 477 388

Accessories for this machine

The original Stürmer accessories and options for Precision guide and drawbar turning machine Optimum OPTIturn TX 6222V, 400 V — add them to the order together with the machine.

Show 13 more accessories