Skip to content

Manual presses

16 products in the catalogue

Products

1–16 of 16

Manual presses from Promash

The manual press delivers force without electricity — with a lever, a rack or a hand hydraulic pump. Here are 16 models with prices from €134.52 to €8,878.80: Optimum DDP and PD3 arbor presses, the Optimum PD5 and PD8 toggle-lever presses, the Unicraft WPP 15 TH TOP hydraulic (15 t) and Metallkraft WPP hydraulic presses with a hand or foot pump — from 15 to 50 tonnes. The hydraulic presses with an electric pump — the WPP with a motor on 400 V, the frame and C-frame presses — are in the hydraulic presses.

The arbor presses have a grey cast iron body and a base that can be set in four positions. They are used for driving in and removing bearings, mandrels, bushings, spindles and pins. The DDP 30, for example, takes a workpiece up to 310 mm high and has a 600 mm arm. The DDP 10 is the smallest — €134.52, and the DDP 50 the largest, for €1,259.70.

How to choose? By the height of the workpiece and the force: for small bushings and pins the DDP 10 or DDP 20 is enough. For larger bearings and 15 tonnes take the WPP 15 TH TOP or look at the hydraulic presses.

Frequently asked questions

What is the arbor press for?

For quickly driving in and removing bearings, bushings and pins with little force, without electricity.

Do you have a manual hydraulic press?

Yes — here are the Metallkraft WPP 15, 15 T, 20 and 30 with a hand pump, the WPP 20, 30 and 50 BK with a hand and foot pump and the Unicraft WPP 15 TH TOP (15 t), and the floor-standing hydraulic presses with a hand pump are in the hydraulic presses.

Last updated: