Skip to content

Presses

67 products in the catalogue

Products

25–48 of 67

Presses from Promash

The metal press is the machine with which bearings go in and out without hammer blows, bushings are driven in accurately and bent shafts are straightened. At Promash there are 67 presses with prices from €134.52 to €23,655 — Unicraft and Metallkraft hydraulic presses from 10 to 200 tonnes and Optimum manual arbor presses.

What types of metal presses are there?

The presses we offer are of two types: hydraulic, where the force comes from a hydraulic cylinder with a hand or an electric pump, and manual arbor presses, where the force comes from a lever and a rack. The hydraulic ones deliver from 10 to 200 tonnes, the arbor presses less force but very fast work.

Hydraulic presses

The Unicraft WPP series — 10, 15, 20, 30, 50, 75, 100, 150 and 200 tonnes. They have a pressure gauge to show the pressure and piston cylinders with a built-in spring. Some models have a two-stage hand pump, and some — for example the WPP 30 E, WPP 50 E and WPP 100 E — also have a pneumatic connection (7.5–8.5 bar), and on the WPP 50 BPF TOP the drive can also be a pneumatic lever. The HMC series — the WPP 50, 75, 100, 150 and 200 HMC — is electro-hydraulic, on 400 V. The Metallkraft presses with an electric pump are the WPP 50 M, HBK, MBK and 50 VH XW on 400 V, and the frame and C-frame presses.

Manual presses

The Optimum DDP 10, DDP 20, DDP 30 and DDP 50 arbor presses have a grey cast iron body and a base that can be set in four positions. They are intended for bearings, mandrels, bushings, spindles and pins. The DDP 30, for example, takes a workpiece up to 310 mm high. The same subcategory also holds the Metallkraft WPP hydraulic presses with a hand or foot pump — from 15 to 50 tonnes.

How to choose a press?

Choose a press according to the force you need and the size of the workpieces. For small bushings, pins and bearings on a workbench, a manual arbor press is enough. For shaft bearings, straightening and larger workpieces, take a hydraulic press of 15–30 tonnes. 50 tonnes is for heavy repair and production.

  • Pressing force: from 10 to 200 tonnes for the hydraulic ones (for example 10, 15, 20, 30, 50, 60, 75, 100, 150, 160 or 200).
  • Width between the beams: for the Unicraft WPP from 340 mm for the WPP 10 TE to about 1,000 mm for the WPP 150 HMC and WPP 200 HMC — how wide a workpiece fits in the frame.
  • Working range: up to about 1,000 mm for the large models — important for long shafts.
  • Space: the arbor presses and the WPP 10 TE are compact; the 50-tonne ones are floor-standing machines.
ModelDrivePressing forcePrice
Optimum DDP 20manual—€256.50
Optimum DDP 50manual—€1,259.70
Unicraft WPP 10 TEhydraulic10 t€318.06
Unicraft WPP 15 Ehydraulic15 t€762.66
Unicraft WPP 30 Ehydraulic30 t€1,186.80
Unicraft WPP 50 Ehydraulic50 t€2,335.86

What is a metal press used for?

The press is used for driving in and removing bearings, bushings and pins, for straightening shafts and profiles, for bending small parts and for press-fitting during assembly. It is used in car repair shops, repair workshops, agriculture, machine maintenance and small-scale production.

The arbor press is indispensable when many identical operations with little force are needed — for example driving in bushings in a series. The hydraulic one takes on the heavy work. Many workshops have both.

Hydraulic press WPP 30 E — Unicraft
Unicraft WPP 30 E — 30-tonne hydraulic press with a two-stage hand pump.

Why buy a press from Promash?

Unicraft and Optimum presses come to us directly from Stürmer Maschinen. If you are not sure how many tonnes you need, describe your workpieces to us — we will help you avoid overpaying for force you will not use.

  • Official importer for Bulgaria.
  • Technical experts at your disposal.
  • Warranty and post-warranty service.
  • Prices include VAT.

Frequently asked questions

How much does a metal press cost?

Manual arbor presses are from €134.52 to €1,259.70. Hydraulic Unicraft ones — from €318.06 for the WPP 10 TE to €13,668.60 for the WPP 200 HMC. Prices include VAT.

Manual or hydraulic press?

The manual arbor press is for small workpieces and fast work with little force. The hydraulic one is for shaft bearings, straightening and anything that needs tonnes.

How many tonnes of press do I need for bearings?

It depends on the size of the bearing and the fit. For a car repair shop 20–30 tonnes is most often sought; if you are not sure, call us.

Can I see the press?

In the showroom in Plovdiv, 47 Kuklensko Shose Blvd, Monday to Friday, 09:00–18:00. Call +359 882 477 388 in advance.

How are delivery and payment handled?

By Pigeon Express to an address or office; the delivery price is shown at checkout and paid to the courier on receipt. Shipments over 400 kg are delivered by arrangement. Payment by bank transfer, cash on delivery or in instalments with tbi bank and UniCredit.

Last updated: