Skip to content

Gluing presses

4 products in the catalogue

Products

1–4 of 4

Gluing presses from Promash

The gluing press presses the glued slats of a top, a stair tread or a panel evenly along the whole length until the glue sets. This way the top comes out flat, without steps between the slats. The category has 4 Holzkraft hydraulic presses.

  • VP 3000×4 — working area 2900 × 1460 mm, four vertical press units, force up to 2000 kg, piston stroke 70 mm. €1,903.
  • VP 3000×6 RP — with frame pressing: 2 horizontal and 4 vertical units, working area 2500 × 1550 mm, force up to 2500 kg, stroke 95 mm. €3,704.
  • VP 3000x3 PRO — working area 3000 × 1610 mm, three vertical manual hydraulic modules, stroke 60 mm. €8,998.
  • VP 3000x5 RP PRO — with frame pressing: 2 horizontal and 3 vertical modules, working area 2630 × 1610 mm, stroke 60 mm. €11,986.

The press replaces dozens of clamps and saves space and time in series gluing. It is suitable for manufacturers of furniture, stairs and solid wood tops. Before gluing, the slats are prepared on a planer-thicknesser.

Frequently asked questions

What is the difference between the presses?

The VP 3000×4 and VP 3000x3 PRO press vertically only — for tops and solid wood edges. The VP 3000×6 RP and VP 3000x5 RP PRO press both horizontally and vertically (frame pressing) — for frames, windows and doors. The VP 3000×6 RP also has a greater force — up to 2500 kg.

What is the working area?

2900 × 1460 mm for the VP 3000×4, 2500 × 1550 mm for the VP 3000×6 RP, 3000 × 1610 mm for the VP 3000x3 PRO and 2630 × 1610 mm for the VP 3000x5 RP PRO.

Last updated: