Skip to content

Lifting equipment

107 products in the catalogue

Products

73–96 of 107

Lifting equipment from Promash

Lifting equipment saves your back and your time: a load that two people lift with difficulty is lifted by a hoist at the press of a button. This category contains all Unicraft lifting equipment at Promash — electric and manual hoists, hoist trolleys, winches, clamps, lifting magnets, scissor lift platforms, crane scales and gantry cranes. In total 107 products with prices from €50 to €4,143.90 incl. VAT.

Types of lifting equipment

Lifting equipment is divided into those that lift (hoists and winches), those that carry the hoist (trolleys, clamps, gantry cranes) and those that grip the load (lifting magnets and lifting clamps). Scissor lift platforms, which lift the load from below, are separate.

Hoists

EKZT electric hoists are from 0.25 to 3 t — most on 400 V, and the EKZT 250-1 and 500-1 on 230 V, with prices from €546. Manual chain hoists lift from 250 kg to 10 t without power and start from €86.

Trolleys, clamps and cranes

Electric and manual trolleys move the hoist along an I-beam. Beam clamps provide a suspension point on the beam without welding. The mobile PK 1 and PK 2 gantry cranes replace the beam where there is none.

Winches

Winches are manual with a ratchet up to 3 t and electric on 230 V or 12 V. The small 230 V electric models are the solution when you are looking for a home or mini hoist. The USZ 801, 1601 and 3201 universal cable winches (800, 1600 and 3200 kg) are directly in this category.

Gripping the load

PLM lifting magnets grip steel sheets from 100 kg to 2 t without power. HKS lifting clamps grip sheets and plates up to 50 mm thick.

Scissor lift platforms

Scissor lift platforms raise the load to working height — from a mobile trolley for 500 kg to an electro-hydraulic platform for 3 t.

How to choose lifting equipment?

Start with the load: how much it weighs, how it is gripped and how often you lift it. Then look at where you will lift it — is there a beam, is there 230 or 400 V power, how high is the ceiling. The answers almost choose the equipment for you.

  • Rarely and without power — a manual chain hoist or a ratchet winch.
  • Often and heavy, 400 V available — an electric hoist, optionally with an electric trolley.
  • 230 V only, up to 999 kg — an EKZT 250-1 or 500-1 electric hoist, or an MES 600-2 H, MES 1000-2 H, ESW 500 or ESW 800 electric winch.
  • No beam — a gantry crane with a hoist.
  • Sheet material — a lifting magnet or a lifting clamp on the hoist hook.
  • The load must be at working height — a scissor lift platform.

For all equipment, choose a load capacity with a margin above the heaviest load. And check that the clamp, trolley and hoist are for the same load capacity — a chain is only as strong as its weakest link.

Electric hoist Unicraft EKZT 10-1 — Unicraft
Unicraft EKZT 10-1 — electric hoist for 1 t, 400 V, lifting height 6 m.

Where is lifting equipment used?

Lifting equipment is used wherever loads are heavier than what one person can lift safely: workshops, shops, warehouses, car repair shops, construction sites. The right equipment shortens the work and reduces the risk of injury.

In metalworking, the hoist and the lifting magnet feed sheets and blanks to the machines. In a car repair shop, the manual hoist and the gantry crane remove engines. In the warehouse, the crane scale weighs the load while it is still hanging on the hook.

Why Promash

  • Official importer for Bulgaria, partner of Stürmer Maschinen.
  • Technical experts at your disposal — we will put together a set of hoist, trolley and clamp for your beam.
  • Commissioning and training.
  • Warranty and post-warranty service, service and maintenance nationwide.
  • Over 200 machines in the showroom in Plovdiv. Prices include VAT.

Frequently asked questions

Which is better — a hoist or a winch?

For frequent vertical lifting — a hoist. For pulling, tensioning and lifting on 230 V without three-phase power — a winch.

Do you have a 230 V electric hoist?

Yes, but only the small ones: the EKZT 250-1 and 500-1 (0.25 and 0.5 t) are 230 V, and the other EKZT are 400 V. The MES 600-2 H, MES 1000-2 H, ESW 500 and ESW 800 electric winches are 230 V as well.

How much does lifting equipment cost?

From €50 for the TK 1 beam clamp to €4,143.90 for the HT 600 LAP scissor lift platform, incl. VAT.

Can I see the hoists in person?

The showroom is in Plovdiv, 47 Kuklensko Shose Blvd, Monday to Friday, 09:00–18:00. Call +359 882 477 388 so we can check whether the model is on display.

How are delivery and payment handled?

We deliver with Pigeon Express to an address or office; the delivery price is shown at checkout and paid to the courier on receipt. Shipments over 400 kg are delivered by arrangement. Payment by bank transfer, cash on delivery or in instalments with tbi bank and UniCredit.

Last updated: